Hardware
========
PenguinComputing Dual Pentium Pro Server
00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge
00:0c.0 SCSI storage controller: Adaptec 7896
00:0c.1 SCSI storage controller: Adaptec 7896
00:0e.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
00:12.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:12.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:12.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:12.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23)
01:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 06)
02:04.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02)
02:07.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
03:08.0 Co-processor: Digital Equipment Corporation StrongARM DC21285 (rev 04)
03:09.0 RAID bus controller: Mylex Corporation eXtremeRAID support Device
Software
========
Redhat 7.2 with GRUB
Error
=====
SCSI reset errors at booting
RH7.3 even has another modprobe error for this SCSI card
Fix
===
a) use rescue mode from the cdrom
b) copy /mnt/source/RedHat/RPMS/kernel-x.y.z-smp to /mnt/sysimage/tmp
c) chroot /mnt/sysimage
d) rpm -ivh /tmp/kernel-x.y.z-smp
Error
=====
mount: error 6 mounting ext3
pivotroot: pivot_root(/sysroot, /sysroot/initrd) failed:
Kernel panic: No init found
Fix
===
No problem for RH7.2, but for RH 7.3. Installed ext2 fs, not ext3 fs.
========
PenguinComputing Dual Pentium Pro Server
00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge
00:0c.0 SCSI storage controller: Adaptec 7896
00:0c.1 SCSI storage controller: Adaptec 7896
00:0e.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
00:12.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:12.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:12.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:12.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23)
01:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 06)
02:04.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02)
02:07.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
03:08.0 Co-processor: Digital Equipment Corporation StrongARM DC21285 (rev 04)
03:09.0 RAID bus controller: Mylex Corporation eXtremeRAID support Device
Software
========
Redhat 7.2 with GRUB
Error
=====
SCSI reset errors at booting
RH7.3 even has another modprobe error for this SCSI card
Fix
===
a) use rescue mode from the cdrom
b) copy /mnt/source/RedHat/RPMS/kernel-x.y.z-smp to /mnt/sysimage/tmp
c) chroot /mnt/sysimage
d) rpm -ivh /tmp/kernel-x.y.z-smp
Error
=====
mount: error 6 mounting ext3
pivotroot: pivot_root(/sysroot, /sysroot/initrd) failed:
Kernel panic: No init found
Fix
===
No problem for RH7.2, but for RH 7.3. Installed ext2 fs, not ext3 fs.
Comments
Post a Comment